What are the operating conditions of the reducer Posted by : admin / Posted on : Jun 28， 2020

Reducer is a kind of equipment often used in many industries. If we want to ensure that the equipment can play a good use effect, the operator needs to use the equipment in accordance with the relevant requirements. And the device has certain requirements for use, I believe many first-time users are not enough to understand this aspect, for this reason, the editor introduced the specific requirements of the device for everyone, let's take a look!
1. The reducer is allowed to be used in the continuous working system, the working environment is non-corrosive, and it is allowed to run in both directions.
2. The working environment temperature is -40-45℃, if it is lower than 0℃, the lubricating oil should be preheated to above 0℃ before starting.
3. The rated rotation speed of the input shaft is 1500 rpm, and it is recommended to use a 960 rpm 6-pole motor when the input power is greater than 18.5 kW; the output shaft cannot be subjected to large axial and radial forces. Other measures must be taken when there are large axial and radial forces; the peripheral speed of the gear transmission is not greater than 20 meters/second.
4. The working positions are all horizontal. During installation, the larger horizontal tilt angle is generally less than 15°. When it exceeds 15°, other measures should be adopted to ensure adequate lubrication and prevent oil leakage.
There are certain restrictions on the use of the reducer is a good phenomenon, otherwise it will easily lead to accidents. In order to ensure that the equipment can work normally for a long time, strict inspection, maintenance and maintenance are required on a regular basis, which can not only avoid the existence of hidden dangers that endanger the personal safety of the operator, but also effectively extend the service life of the equipment. Work is very necessary.

www.reducerfactory.net