What is the cause of the weak lifting force of the spiral screw elevator?
Spiral screw elevator is a relatively common lifting component, but sometimes the phenomenon that the spiral screw elevator has a weak lifting force, what is the reason for this phenomenon? Let us give you a simple analysis.
One: The pressure adjustment of the overflow valve of the spiral screw lift does not meet the relevant requirements. When the pressure of the equipment is adjusted to the required value, the problem can be avoided.
Two: It is directly caused by the internal leakage of the oil cylinder. If you want to avoid this situation, you need to check or replace the oil cylinder assembly of the screw screw elevator.
Three: The reversing valve of the screw screw lift is locked or leaked internally, and the valve assembly of the equipment needs to be inspected or replaced.
Four: Because the oil level of the screw screw lift is too low, the oil inlet filter is blocked and the fuel is insufficient. Device.
Five: There is a problem with the oil supply pump of the spiral screw lift. If you want to solve this problem, you need to check or replace the oil supply pump.
The relevant content about the screw screw lift is introduced here first, I hope the above content can be helpful to everyone, thank you for your watching and support, if you have any questions or if you want to consult directly Contact our staff, we will serve you wholeheartedly and provide quality products.