The reducer will generate some heat during operation. If it is not radiated in time, it will have a bad effect on the body. Therefore, timely heat dissipation is required. Timely heat dissipation can avoid some circuit overheating problems and protect the safety of the fuselage. How to improve its heat dissipation efficiency?
1. Increase heat dissipation: If the general cabinet cannot meet the heat dissipation requirements, heat dissipation fins can be added outside the cabinet. The heat dissipation fins should be set so that the air can circulate naturally. The advantages are simple structure, convenient installation, better heat dissipation effect and easy serialization.
2. System cooling: The use of fan to dissipate heat is simple and easy and easy to operate. However, the disadvantage of the fan heat dissipation method is that it is not suitable in some situations. For example, when the reducer is dissipated in a coal mine, the use of a fan will seriously pollute the surrounding working environment and mechanical equipment, and it uses radiation to exchange heat. The heat lost is also limited.
3. Lubricating oil circulation: A water-cooled or air-cooled device is installed outside the reducer to cool the lubricating oil. The cooled lubricating oil is returned to the reducer for lubrication. This type of cooling is mainly used for cooling under high power or in the environment Used when the temperature is higher. The advantages are good cooling effect and long life of lubricating oil.
Improving the heat dissipation efficiency of the reducer will be more conducive to the heat dissipation of the equipment, and the excess heat will be dissipated in time to prevent the body from overheating. Using it in a ventilated environment has a strong effect on improving efficiency and enhancing heat dissipation.